|
01.
|
Q. Can I use ATA100 on a non-ATA100 motherboard?
|
|
|
A. It is necessary to add an ATA100 add-on card for non-ATA100 motherboard.
|
|
02.
|
Q. When should we upgrade the system BIOS?
|
|
|
A. When your system is very stable, it is not necessary to upgrade your system BIOS. However, if you are having compatibility problem or can't use some of the setting on the new device then you need to upgrade your system BIOS.
|
|
03.
|
Q. How to set the jumpers on Lex Motherboards: 790E, 791PRO, 792
|
|
|
A. To set the jumpers for the 790 board make sure all the ratio setting are off in the automatic detect settings and just set the FSB for AMD Duron set to 100Mhz and for AMD Athlon XPs up to and including some 2400+ to 133Mhz this setting is doubled in the multipliers so that 100 gives 200 bus speed and 133 gives a 266 bus speed.
791 and 792 are exactly the same except they are able to take the 333 MHz CPUs which are the 2400+ and above. This setting is in the same position as the 790 board but there are extra pins to allow for the extra setting.
Please Note that all instruction of the positions of the jumper settings are in the manuals supplied with the boards. |
